Saine Adhesives India LLP

LOCTITE 243 is a blue, general purpose threadlocker that provides a medium strength bond. It works on all metals, including passive substrates, such as stainless steel, aluminum and plated surfaces, without the use of a primer. Suitable for use on most oil-coated, "as-received" fasteners without cleaning.

• Prevents fastener loosening on vibrating assemblies, e.g., pumps, gear boxes or presses
• Works on all metals, including passive substrates (e.g., stainless steel, aluminum, plated surfaces)
• Suitable for use on most oil-coated, "as-received" fasteners without cleaning
• Permits disassembly with ordinary hand tools for easy service and maintenance
• NSF/ANSI 61 certified

Features and Benefits

• Prevents loosening and leakage from shock & vibration by adding approximately 25% extra strength to the normal loosening torque.
• Bonds well despite minor surface contamination due to industrial oils, e.g. motor oils, corrosion prevention oils and cutting fluids.
• Has a characteristic blue colour that fluoresces under UV light to detect product application

LOCTITE® 242 is a medium strength, medium viscosity, anaerobic-curing threadlocking adhesive offering general purpose qualities. LOCTITE 242 is thixotropic to prevent migration after application and is intended for fasteners that require normal disassembly with standard hand tools. Medium strengthMedium viscosityQuick fixture timeThixotropic to reduce adhesive migration

• Prevents loosening and leakage from shock & vibration: It wicks into the grooves between the mating threads and cures into a hard thermoset plastic that strengthens the assembly against shocks and seals the threads.
• Low viscosity product: The low viscosity of this product makes it ideal for occupying the tiniest of gaps between the threads so that proper clamp load in maintained.
• Fluorescent: It has a characteristic blue colour that fluoresces under UV light. This helps during service to detect as to whether or not the product had been applied.
• High strength: It is suitable for applications that need frequent disassembly, as it can be easily removed using standard hand tools

LOCTITE 406 is an instant adhesive, designed especially for the quick bonding of plastics and rubbers. This product offers exceptionally low viscosity. When combined with LOCTITE primers for cyanoacrylates, it can also be used on difficult-to-bond plastics.

• Bonds Plastics and EPDM
• Makes O-Rings Instantly
• Wicking Viscosity for Tight Bond Lines

LOCTITE 495 is a transparent, colourless, low-viscosity, general purpose instant adhesive offering quick bonding. It can to bond a wide range of materials, including plastics, rubbers and metals. Also, suitable for polyolefins if used with primers.

• General Purpose
• Low-Viscosity
• Bonds plastics, rubbers & metals

Features and Benefits

• Ideal for bonding rubber, metal and plastic parts.
• Primers like LOCTITE 770 or LOCTITE 7239 improve adhesion for polyolefins.

LOCTITE 577 is designed for the locking and sealing of metal pipes and fittings as well as other threaded assemblies. The product provides an instant, low-pressure seal for metal pipes and fittings. It will not creep, shrink or shred. It has excellent chemical and thermal resistance and offers less migration of liquid product after application.

• Excellent chemical resistance
• Medium-strength, general purpose thread sealant for sealing metal threads
• Locks connection against vibration-induced loosening and other stresses
• Cures on active and inactive metals
• Instant low pressure seal

LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part.

• Ideal for fine threads as used in hydraulic, pneumatic & general fittings
• Instant low-pressure seal
• Resistant to fuel, oil, coolants and hydraulic fluids
• Locks connection against vibration loosening
• Suitable for metal threads only

LOCTITE 415 is a transparent, colourless, high-viscosity instant adhesive. Well-suited to metals and suitable for rubbers and plastic. Also, suitable for polyolefins when used with primers

• Bonds Metals
• Ideal for Bonding Small to Medium-Size Parts
• Solvent-free

• Ideal for bonding small metal parts for general maintenance.
• High-viscosity adhesive offering maximum adhesion to metals.
• Primers like LOCTITE 770 or LOCTITE 7239 improve adhesion for polyolefins.
• High-viscosity.

LOCTITE 574 seals close-fitting joints between rigid and semi-rigid metal faces and flanges. The nature of LOCTITE 574 reduces the migration of liquid product after application to the substrate. It has a high oil tolerance and excellent water and glycol resistance.

• Fills Gaps upto 0.25 mm
• High Oil Resistance
• 150°C Service Temperature

• Prevents leakage: It fills all gaps between the mating flange parts and cures into a hard thermoset plastic that fills all surface irregularities providing 100% seal.
• Ideal for rigid and semi-rigid flanges eg. cast iron components, pump housing, gearbox and engine casing.
• Adapts to flange surface irregularities and scratches up to 0.25 mm.
• Eliminates gasket compression set.
• Reduces inventory cost and complexity as one tube can make many different shapes and sizes of gaskets.
• Provides resistance to low pressure immediately after seal.
• Higher strength on contaminated surfaces.
• Better flexibility and improved adhesion.
• High performance on passive metals without an activator.
• Enhanced sealing capability.

LOCTITE 638 is designed for the bonding of cylindrical fitting parts, particularly where bond gaps can approach 0.25 mm. Ideal for use where high dynamic forces or cyclic loading is expected, for eg: shafts, gears, pulleys and cylindrical parts that

• High Strength (4200 Psi)
• Fills Gaps Upto 0.25 mm
• 180C Service Temperature

Features and Benefits

• Prevents loosening: It fills all gaps between the cylindrical components and cures into a hard thermoset plastic. This unitizes the assembly and prevents loosening and leakage from shock and vibration.

• Works on all metal substrates.
• Tolerant towards minor surface contaminations.
• High temperature resistance.
• High strength on all metals, including passive substrates (e.g. stainless steel).

LOCTITE 638 is designed for the bonding of cylindrical fitting parts, particularly where bond gaps can approach 0.25 mm. Ideal for use where high dynamic forces or cyclic loading is expected, for eg: shafts, gears, pulleys and cylindrical parts that

• High Strength (4200 Psi)
• Fills Gaps Upto 0.25 mm
• 180C Service Temperature

Features and Benefits

• Prevents loosening: It fills all gaps between the cylindrical components and cures into a hard thermoset plastic. This unitizes the assembly and prevents loosening and leakage from shock and vibration.
• Works on all metal substrates.
• Tolerant towards minor surface contaminations.
• High temperature resistance.
• High strength on all metals, including passive substrates (e.g. stainless steel).

LOCTITE® LB 8008 C5-A™ provides a shield against high temperature seizing and galling. All mated parts, studs, bolts, flanges and gaskets, remove more easily and in cleaner and better condition. This product can be used on copper, brass, cast iron, steel, all alloys including stainless steel, all plastics and all non-metallic gasketing materials. 
Typical applications include original equipment and maintenance, and equipment associated with petroleum chemicals, steel mills, power plants, marine and foundries. This product is typically used in applications with an operating range of -29 °C to +982 °C.

LOCTITE® 55 is designed for sealing of metal and plastic pipes and fittings. It needs no cure time and results in an immediate, full pressure seal. The ideal choice for a quick, easy and reliable seal. The product has approval for gas and potable water and is certified to NSF/ANSI, Standard 61.

• General purpose, threaded pipe and fitting sealant
• For a quick, easy and reliable seal
• Non-curing, immediate, full-pressure seal
• DVGW/KTW approval for gas and potable water
• WRAS listed – approval number 1807518, meets BS 6920 for potable water: 0808533
• Certified to NSF/ANSI, Standard 61

• General purpose, threaded pipe and fitting sealant
• Non-curing, immediate, full-pressure seal
• For a quick, easy and reliable seal
• WRAS listed – approval number 1807518, meets BS 6920 for potable water: 0808533
• DVGW/KTW approval for gas and potable water
• Tested in accordance with EN 751-2 Class ARp and DIN 30660
• Up to 45-degree readjustment possible without any fear of leakage
• NSF/ANSI standard 61 approval